[2.0.5.0]

Fixes

• Fix so that message "Communication Settings" (PGN 0xFFBA) in ePS2 legacy mode can set transmission repetition rate to any value between 10 and 255. (23982)
• Set the DLC of the "Automation Feedback" message (PGN 0xFFBC) in ePS2 legacy mode to 3. (23982)
• Change priority of address claimed to 0 in ePS2 legacy mode. (23982)# [2.0.4.0]

Fixes

• Listen to message "Communication Settings" (PGN 0xFFBA) in ePS2 legacy mode. (23982)# [2.0.3.0]

Fixes

• Fix address claimed in ePS2 legacy mode to correspond to C2C 1.2.0.1. (23982)# [2.0.2.0]

Fixes

• Fixed AMC1 tilt direction to follow ePS2 specification. Positive tilt AMC1 value will now result in clockwise tilt as seen from the excavator cabin. (23514)# [2.0.1.0]

Fixes

• Fixed bug regarding handling the CAN message with PGN 0x1FFCD. (22634)