[2.1.3.0]

Features

• Add support for old ePS Version 1 rotation sensor in Legacy mode (If C2C detects the old sensor, it will automatically go into Legacy mode), removing the need for C2C Version 1.2.0.1. (43963)

Fixes

• Fix C2C sometimes setting an alarm when running crawl or wheel functions. (44280)
• Fault codes regarding the tilt sensor are no longer set in Legacy mode. Previously, Tilt Sensor Fault codes would still be visible in Microconf and the red flashes on the C2C unit, even though they were not reported to the Machine Control System on the C2C X1 Connector (Which is still the case). (46249)